Anything needs careful protection can be sustained with, the protection regulations Iraqi resistance net cleaning machine have?
First, the usual protection
A, first in front of the boot, the first view of the machine as follows:
1, the filter pressure gauge can appear to 0.1Mpa or less;
2, the host can have a loose screw down;
3, the piping, valves, window investigate whether there is run, run, drip, leak representation;
4, the device clean appearance view;
5. Check organize distilled box, button collector, cilium filters, oil-water separators and the like.
B, followed by Power Survey:
1, turn the power switch, can normally view a variety show;
2, open the cooling water valve.
3, open air compressor, and so the pressure reaches a specified value 0.7Mpa, then the engine is operating.
C, culminating in the job has been completed:
1, the final day after the job is completed a wash cycle, recognition inside the retort distillation PCE has been completed.
2, turn off the power switch, the inlet valve.
3, the final work is completed, all off valves closed.
Second, the weekly protection
1, manifold organize once a week, and all the debris should trap inside with a cotton silk cloth. Then recovered its operational status.
2, compressed air filters organize once a week. Filter element with a soft bristle brush net, organic glass finishing clean water and wipe dry.
3, the survey bore glass should be cleaned once a week.
4. clothing door, distillation tank, lint filter, button trap view installed components and other seals could be damaged.
Third, the monthly protection:
1, grease cup oil plus a new month. (According to the instructions of the oil)
2. Check the compressed air oilier oil level, if necessary increase in time. (According to the instructions of the oil number)
3, compressed air hose fittings once a month to view, if necessary, be tightened.
4, finishing water filter
5, finishing steam filters (only for steam-type machine)
6. Check the machine bolt, tighten.
