Women also want to maintain to maintain, cars!Industrial washing equipment need maintenance, of course, is over 2014 at the beginning of a New Year is also the to the laundry every corner of the clean clean, all kinds of washing equipment need maintenance maintenance, believe everyone know on a regular basis for industrial washing equipment maintenance is to keep its normal performance, reduce failure, one of the important measures to improve the service life of the machine.And that is regularly is carried out in accordance with the time.In general washing equipment a little service each month, each year a great service.Below we first for annual maintenance
Industrial washing equipment annual maintenance;For industrial washing equipment annual maintenance is mainly concentrated in the replacement of parts, suspension components and clean up of all the electric valve replacement, adjust the transmission parts of oil removal, and checking and adjusting, etc., as well as the electrical system can refer to the following specific implementation.
1, change speed reducer lubricating oil.
Industrial washing equipment annual maintenance;For industrial washing equipment annual maintenance is mainly concentrated in the replacement of parts, suspension components and clean up of all the electric valve replacement, adjust the transmission parts of oil removal, and checking and adjusting, etc., as well as the electrical system can refer to the following specific implementation.
1, change speed reducer lubricating oil.
2, the main parts of the adjustment of each position.
3, check the balance of the spring leg degrees, adjustments if necessary.
4, check the wear condition of main bearing (principle replaced every two years main bearing).
5, check the wear condition of belt, replace if necessary.
6, for water, gas and steam valve for cleaning or replacement.
7, the pneumatic control valve to clean up.
8, the electric system to conduct a comprehensive inspection.
9, motor for annual maintenance.
Within 10, using professional washing detergent on the tank cleaning sterilization.
6, for water, gas and steam valve for cleaning or replacement.
7, the pneumatic control valve to clean up.
8, the electric system to conduct a comprehensive inspection.
9, motor for annual maintenance.
Within 10, using professional washing detergent on the tank cleaning sterilization.
Industrial washing equipment monthly maintenance;For industrial washing equipment monthly maintenance of the various components is more often than do the lubrication, the check valve adjustment, transmission parts, electrical system maintenance and repair of this a few pieces.We can perform.
1, cheer on main bearing.
1, cheer on main bearing.
2, check the water, steam, compressed air system for leaks and repair if necessary.
3, check the main part (reducer, motor, spindle pulley) whether the connection of the screw is loose.
4, check the reducer and the oil level of oil seal.
5 put gas valve open, check the pneumatic system (including gas purge valve).
6, strong belt tightness, if necessary, to adjust.
7, check the electrical system in good condition (electrical).
8, washing of refrigerator, check the sealing parts, and according to the condition of wear and tear for replacement.
9, check the soap detergent congestion inside the box, and according to the condition of residual proper cleaning.
9, check the soap detergent congestion inside the box, and according to the condition of residual proper cleaning.
In fact most of the time we in addition to according to the above and do monthly and annual maintenance to industrial washing equipment, we also need to do it after using in the daily clean up, remove residues on the inner cylinder shell under residual stains and residual liquid, clear in time the bag flocculant MAO impurities, etc.Fully guarantee the machine is normal, normal and efficient use of the convenience for us.
