About the attack also often have large laundry accident news media reported.Not a laundry in the washing equipment explosion is leakage cause electrocution.For laundry washing equipment safe installation and operation of guangzhou ENEJEAN wash equipment manufacturing co., LTD in to explain for everybody again and again why washing device must be configured ground?
Washing equipment also belongs to the electrical appliances class, so the washing equipment time forever, also can appear other electrical appliances often appear problem, that is the leakage, then speaking, if the washing equipment using the appearance, the time is long later so we are going to nip in the bud, generally will have current washing machines wash, then we will check whether the washing equipment rotating part of the problem, if there is any leakage which place happen;Or you can check at the time of washing washing water seep into the inside, and appear the situation of the transmission of power;
Common washing machines is good, also can appear with electric power, but a relatively small electric power, no damage, so common washing machines, we propose that a earthed on washing equipment can effectively prevent the leakage of the washing equipment happen, if the shell of a charged to the washing equipment in the washing equipment, then we will pay attention to, did washing equipment on the line there are worst, if found, handle in time, to prevent the occurrence of leakage and washing equipment can lead to bad happened.
To be on the safe side, washing machine motor cannot overload running.Motor must work within the scope of rated current, motor overload operation of the main reason is due to the large drag load, the voltage is too low, bearing damage, or is driven mechanical binding, etc.If overload time is too long, the motor will absorb a large number of active power from the power grid, the current increases sharply, temperature rise, high temperature aging under the insulation of the motor to burn quickly.So the motor in operation, attention should be paid to regularly check transmission device is flexible and reliable operation, even the shaft concentricity is standard, the flexibility of gear transmission, etc., if found to have lag phenomenon, should immediately stop running again after find out reason for troubleshooting.
hotel Large washing equipment must be grounded line ?
- The last article：About the large washing equipm...
- The next article：Large installation and laundry...
