No matter any electrical appliances product, one thing is necessary, missed it maybe you can not even boot!This is the product manual, its function is to quickly lead consumers to use the most scientific way products, consumers and teach some simple troubleshooting.For washing equipment products, at the time of installation also need to read the instructions first said, because it has the most comprehensive installation process.Today the author power net washing equipment storyteller, for example, to introduce the washing equipment installed in the whole process of using for the first time.
1, open the packing to check.Open after washing equipment packaging need to check whether the washing equipment is damaged in transit, and check whether all the accessories are complete.
2, dismantle transportation bolts.Before using the washing equipment, be sure to speak on the back of the carriage bolts removed, otherwise the washing equipment to run not only the noise is very big and the fuselage shaking will be very bad.
3, select install flat places.Washing equipment prior to installation, choose to install location features must be hard, dry, flat, and want to avoid direct sunlight, away from the gas such as heat source.Do not put the washing equipment on the carpeted the negatives.
4, if not smooth, adjust the foot.After washing equipment in place, check the washing equipment is smooth, if you have, you can adjust the four foot until smooth.
5, the use of washing equipment dedicated faucet.There are washing machines on the market for faucet to sell, can be the first joint of the above four screws twist, put on the joint circular plastic and loosen round metal ring, and then the joint set above the 4 screws tighten the faucet, finally, the joint above the round and round metal ring on tight.
6, drain.In order to prevent the occurrence of siphon phenomenon, a drain installation height should be between 0.6 1 m, cut the drain end not immersed in the water.
7, power supply connection to safe and reliable.The safety of the power supply reliability is the guarantee of washing equipment operation, to ensure that the voltage and washing equipment specification is consistent, used alone more than 10 a alternating current (ac), reasonable choose fuse or fuse.
8, the new washing machines to wash and use.Due to the washing equipment will be checked before they go out, and then seal and sold to consumers.Due to internal, there will be some water for a long time will cause some peculiar smell, so a new machine used for the first time it is better to clean again, such as operation "tube cleaning procedure.
Of course everyone when the installation of the equipment in addition to need to carefully check the installation manual will need a communication and technology, we ENEJEAN washing equipment of the company in a professional after-sale technical team, any problems you encountered in the installation process can contact our after-sales technology to solve.
Large washing equipment installation method and matters needing attention
- The last article：Hot summer washing machine mot...
- The next article：Washing equipment into which a...
