Easily solve the washing equipment operation noise is too big

             Noise affected our lives and affected our work, but the noise is everywhere.ENEJEAN washing equipment small make up today will share with you about the hotel operation of laundry, if you are working in the laundry room so you must have empathy, laundry inside all day is washing equipment operation noise.
             Washing equipment with long time, because of a shortage of oil machine wear, smooth, aging and spring deformation of parts such as reason, will appear all sorts of abnormal vibration and noise.If not timely repair, will cause the washing equipment parts accelerated wear straight to damage.In fact, as long as after normal correct debugging and simple repair, can eliminate or reduce the vibration and noise.
      1 when the motor running, running belt a crack.The reason is provoked by drive belt wear for a long time.Overhaul, the motor can be fastening screws loosen, the motor in the opposite direction to the roller axis rotation, make the drive belt tension, and will stand the fastening screw.
     2 washing clothes when running, roller rotation giggles.Access to water injection but do not put the clothes to inspect, at this time if there is still a chuckle when the platen movement, that is with the dolly tub bottom friction roller rotation.If to continue into the clothing, the noise will be bigger.The cause of the problem may be the roller screw loosening, can remove the drum, and then in the shaft bottom with proper thickness of the gasket, to increase the interval distance of roller and the bottom, eliminate the impact or friction between the two.If it is roller outer ring friction dolly tub should unload drum, trimmed after the mount.
     3 washing clothes when running, the fuselage popping out noise.This kind of question is more laundry inside tube with aircraft skin collision occurs, it is also possible that four foot washing equipment is put out or not fully contact with the ground.Then you need to do the washing equipment center properly adjusted.
           Washing equipment preventive maintenance and maintenance is lower noise very good method, so the general hotel washing equipment operation need to overhaul once a month, to ensure that equipment normal parts and wearing parts were found in a timely manner!

The last article：Washing machine to clean, but ...
The next article：Which brand of Laundry washing...