Laundry staff in operating large washing equipment will meet when suddenly shut down, so when operating the washing equipment, if stopped work what happens occasionally, Guangzhou power net washing equipment manufacturing experts remind you do not need to check too many things, just check the inverter have overload occurs, in the event of overload, careful analysis of the cause of the overload, so as to solve the fault.If frequent downtime, it is attention, not only to analyze the computer board, also check the motor is defective.
Here is guangzhou ENEJEAN wash equipment manufacturing co., LTD. Technical experts to summed up the three leads to washing equipment in the process of running the cause of the sudden stop;
1, washing equipment, motor fault: stop occur to the automatic washing equipment, is the most direct performance of motor fault occurs.The motor stopped spinning, washing machine will not work.After washing machine motor fault occurs in addition to the protection of the inverter, there will be other motor itself.Motor seal do not good, there is water into the motor, and short circuit happens, and short circuit protector will start protection, disconnect the circuit.
2, washing equipment computer board program problem: in some cases, washing equipment computer board application problems, also can appear to stop the phenomenon.For this reason to reset the computer board procedures.
3 reasons of frequency converter, washing equipment: automatic washing equipment inverter overload occurs, will start the overload protection.Under what circumstances will happen overload protection.In general, washing capacity more than the rated capacity, under the condition of motor torque is not enough, overload, will happen this time frequency converter will overload protection, make the motor stop.Capacity of 50 kg, for example, fully automatic washing machines, the biggest only 50 kg, how clothes up to 70 kg, overload protection, occurs to laundry to stop washing.Frequency converter in the event of a stream, or undervoltage, also happens to protect, to stop the motor, the washing machine will also stop.
Finally need to remind you the laundry staff, if you not a technician or no technical personnel at the scene to guide do not do STH without authorization to the washing equipment mechanical maintenance inspection, so as to avoid unnecessary risk accident.
Came to a sudden stop in the process of large washing equipment operation how to return a responsibi
- The last article：Large fully automatic washing ...
- The next article： About the hotel large washing...
